I recently added a sprit pro kit with cr touch to my 3v2. Upgraded firmware to mriscoc/professional. Now I don’t know what slicer to use or settings. I tried a print and it only printed in one line on left of plate front to back
Announcement
Collapse
No announcement yet.
Ended 3v2 with sprite pro hot end problems
Collapse
X
-
I haven’t used that combination of extruder and firmware but the first place I would look is the g-code being produced by the slicer.
Since it does print the prime line it means the firmware/extruder/hot end is working so there is something else going on. Perhaps the g-code will reveal something more to pursue.
Comment