Announcement

Collapse
No announcement yet.

Da Vinci 1.0 Fan Plug Size

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Da Vinci 1.0 Fan Plug Size

    Can someone tell me what the plug type is on the extruder fan? I ordered one, but the plug didn't fit the Da Vinci. It was too large. I need to find a replacement fan or harness.

    Thanks.

    #2
    Pictures of plug or harness?

    Comment


      #3
      It's smaller than the standard RepRap type plug.

      Click image for larger version

Name:	Image-1.jpg
Views:	1
Size:	83.3 KB
ID:	21633

      Comment


        #4
        It looks like a 2.0mm PH series JST connector. The connector you probably got that was too large was a 2.54mm JST-XHP 2Pin Female Connector (In the picture below; The connector on the Left is the Male Connector, and the Connector on the right is the Female Connector)

        Click image for larger version

Name:	JST 2.0mm connector.jpg
Views:	1
Size:	18.5 KB
ID:	21634
        You can get them here http://www.digikey.com/product-searc...R-2&vendor=455
        or on Amazon here http://www.amazon.com/uxcell-50pcs-C...=connector+jst

        Hope this helps

        Comment


          #5
          Thank you so much! Perfect!

          Comment


            #6
            No problem, let us know if it works for you when you get them.

            Comment

            Working...
            X