Announcement

Collapse
No announcement yet.

Search

Collapse
9 results in 0.0068 seconds.
Keywords
Members
Tags
Flashforge Creator Pro x
  •  

  • Flashforge Creator pro stops extruding white ABS mid-print

    Hi,

    I'm pretty new to the forum but I've already experimented a bit with my 3d printer.
    I have a Flashforge Creator Pro (version 1) with which I successfully made several prints with black ABS filament. I assumed I was using the right extrudor temperature, bed temperature and other settings. I'm using a raft.

    Trouble arised when I switched to white ABS filament. I wanted to print the exact same model in white instead of black. Two prints went fine, but on the third...
    See more | Go to post

  • Genius
    started a topic Nozzles Tearing Print Surface Paper

    Nozzles Tearing Print Surface Paper

    I am new to 3D printing and have a problem with the FF Creator Pro. When I attempt to print a sample off the sd card the nozzles touch the print surface and tear the paper. I have attempted to level and lower the surface by tightening each bolt as far as they will tighten but I am still too close. In fact, the nozzles even tear the paper when I select the "leveling" option and I cannot fit a sheet of paper between nozzles and surface even when bolts are tightened fully. Is there a way...
    See more | Go to post

  • windows__xp_
    started a topic Flashforge Creator pro extrusion problem

    Flashforge Creator pro extrusion problem

    Hi there! im kind of here as a last resort right now, i have a problem with my extruders that i just cannot fix. When it is printing (both extruders have this problem), no filament is coming out, and it makes an odd, i guess clicking sound, and when i hold the filament, it bounces slightly. This isnt a clog, as i have taken both extruders apart and gone through the unclogging process, and i can also push fillament through a heated nozzle manually. it also "prints" when filament loading....
    See more | Go to post

  • Belvis
    started a topic hello at all

    hello at all

    hello at all, I must to buy a dual extruder 3d printer to print complex components that require soluble supports in ABS and ASA, so i need it to also reach high extrusion temperatures, which do you recommend between Qidi Tech X-Pro, Flashforge Creator Pro and Wanhao D4S?
    See more | Go to post

  • TonyPagett
    started a topic Flashprint test cubes

    Flashprint test cubes

    Hi, I am trying to find the infill resolutions for the two (left and right extruder) test cubes that are included with my Flashforge Creator Pro
    See more | Go to post
    Last edited by Admin; 11-22-2019, 10:46 AM.

  • Hello, I’m new to the forum but not printing.

    Hello,

    I am new to the forum but not to printing. I have owned several printers over the last 5 years. Including 2X Reprap Guru Prusa i3 v2, 3X ANET A8’s, 2X Flsun 3D cubes, and a PowerSpec ultra pro 2 dual extruder printer. The powerspec is the only one I did not build myself. I have also built several printers for friends of mine. I have some questions on settings for the PowerSpec printer.
    See more | Go to post

  • hdunker
    started a topic Flashprint will not enter print cycle

    Flashprint will not enter print cycle

    I have been using Simpify3d and used Meshmixer to slice a print into 2 pieces. Simply3d would generate the G-code incorrectly so I have been trying to use Flashprint to see if it would work. I load the model, add support, click on PRINT and a dialog box opens to address ABD/PLA and such. Then I click the okay on the dialog box and it only takes me to the screen to save the current model and never goes to print. No matter where I select PRINT from, I only get the same dialog box to save the model...
    See more | Go to post

  • dharmikkathrani
    started a topic Issues with FF Guider 2

    Issues with FF Guider 2

    Hi
    Hope you are doing well


    I have been facing some issues recently after I changed the hot end of the guider 2.(Purchased from official Flashforge reseller. Original replacement.)
    It would be great if someone could help out


    1) The extruder drastically slows down while printing and then moves to a point and over extrudes and pauses, only to try and
    start printing off bed, after which it has to be turned off.


    2) The extruder...
    See more | Go to post

  • andreito
    started a topic Creator Pro malfunction " Tool 0 failure"

    Creator Pro malfunction " Tool 0 failure"

    As I had to inspect the link head , I unscrewed the related nozzle (as done several times in the past, without any problem) .However, after re-installing the nozzle and having started the printer up, a warning saying "Tool 0 failure" appears and the printer becomes unusable. I checked all contacts and a blue cable on the left heating head came out easily from its receptacle (while the one related to the the right head seems firm in place).I suspect this cable being the temperature probe.Could...
    See more | Go to post
    Last edited by Admin; 03-05-2018, 08:12 PM.
Working...
X