No announcement yet.


15 results in 0.0692 seconds.
da vinci duo

  • Da Vinci Post-Mortem: Read this before you buy!

    After about 10 months of ownership, I am now done with my XYZ Da Vinci 2.0 Duo, and am posting this to relay my experiences with the product and company as a whole. I have had a very negative experience, and would like to sum the entire thing up in four words:

    Do not buy this.

    Or really any of their printers, but let's delve into a bit more detail.

    Hardware-wise the Da Vinci is a solid machine. It looks beautiful and professionally made. Physically it...
    See more | Go to post

  • AndyHargreaves
    started a topic Da Vinci Duo

    Da Vinci Duo

    Just got this brand new. I'm having an issue with the left-side extruder scraper thingy. When the print head moves across to scrape at whatever stage of the process it never reaches all the way back, making a noise as if the cogs are slipping and then when it moves to the back left to scrape the print head it misses as it's not for enough back. I've calibrated to to 100 to attempt to resolve some issues with inconsistent prints, but I wonder if this may be partly related to prints slipping...
    See more | Go to post

  • Dontknow
    started a topic Adjusting bed in da vinci

    Adjusting bed in da vinci

    WELL WELL!!!..

    2 Days ago just received my 2nd DA VINCI 1.0A.... I did not want a 2 EXTRUDERS... Eventually I consider them a waste of money at least for the use I need my PRINTERS... ALTHOUGH I have another 4 with DUO EXTRUDERS... Anyway.

    I made my first PRINT with the 1.0A easily... But the object was small... And printed mostly in center of the bed...

    Then I tried a bigger one... 3 times bigger object than the previous...

    See more | Go to post

  • hunterjwizard
    started a topic Da Vinci 2.0 Duo Calibration woes

    Da Vinci 2.0 Duo Calibration woes

    Hi folks,

    I've managed to flub my printer up pretty hard. The calibration is so far off that I get +ERR +ERR +ERR every time I run the routine. I know this means the bed is either too high or too low to detect. Unfortunately I don't know which it is. If any of you have owned a Da Vinci you probably recognize my frustration.
    See more | Go to post

  • Extruders Not Heating on Da Vinci 2.0 Duo!

    Anyone with ideas please, please speak up. It's not the connectors on top; those are gone and the wires are directly connected. If I hold a hair dryer to the extruder, the temp does go up. As long as I have the dryer blowing on it I never get the heater decoupled error. As soon as I stop the dryer the temp drops and the decoupled error hits. It's like the motherboard isn't sending the command to fire up the extruders. I've checked and the onboard fuses do not appear to be blown.
    See more | Go to post

  • Dontknow
    replied to Hallo to all 3d printer users
    Here is my kingdom...

    And a PRUSA i3 is under the bench... in his box half finished...

    and tomorrow I am receiving a new XYZ DA VINCI 1.0

    I have in possession the e3d V6 Nozzles, PROMETHEAUS NOZZLES.
    EXTRUDERS from ALUMINUM... I have make many upgrades to 2 of my 3D printers.

    And will definitely go to upgrade or better say to rip everything off CUBEX DUO.

    did I mentioned CUBEX sucks????

    See more | Go to post

    Leave a comment:

  • gert
    started a topic XYZ to launch da Vinci 2.0 Duo

    XYZ to launch da Vinci 2.0 Duo

    Even while the daVinci 1.0 is still booming at Amazon XYZ is preparing to launch version 2 of its printer which will come with a dual printing head

    Simon Shez said his goal for XYZ is to make 3d printers more widely adopted ... i.e sell more printers haha

    Read the full specs here

    See more | Go to post

  • Boxapixels
    started a topic Successes with Duo?

    Successes with Duo?

    Hi All.
    I'm new to the forum and I am looking for any assistance or experiences with the Da Vinci Duo (Blue).
    I'm rarely able to get a successful print out of it.
    I turned it off a few weeks as I was just getting frustrated - went back to it today.

    Issue 1 - Extruder 2 drags into the previous layer
    Issue 2 - Extruder wire harness sometimes messes with the left side drive belt
    Issue 3 - Curving up at corners of prints - skirt helps a bit
    Issue 4 -...
    See more | Go to post

  • joey117
    replied to New to the 3d printing world
    I have been looking at else 4 printer but i really like the idea of the first one and it is not about the cost Fabrikator Mini 3D Printer , XYZPrinting Da Vinci 2.0A Duo 3D Printer , Flashforge® 3D Printer Finder Single Extruder Printer , Da Vinci 3D Junior printer
    See more | Go to post
    Last edited by joey117; 04-26-2016, 08:30 PM.

    Leave a comment:

  • hunterjwizard
    started a topic Simplify3D


    So I am normally very put off by 3rd-party software when it comes to this sort of application, so I thought I'd share my experiences.

    I have a Da Vinci 2.0 Duo that has been, shall we say... temperamental. It worked fine out of the box and I was thrilled with the simplistic software. I do all my own modeling and didn't need anything more sophisticated. Unfortunately, the printer only wanted to work in fits and starts, suffering a myriad of bizarre issues and prompting many unkind...
    See more | Go to post

  • Dynamode
    started a topic Da Vinci Filament Problem.

    Da Vinci Filament Problem.

    Hello, I have a DaVinci Duo 2 XYZ Printer. I have not had it long, but after setting it up and getting the hang of things it's worked fine.

    I have been Printing with both colours. Red/White that come with the Machine. With no problems.

    When I went to use it today, I could see the White Filament had snapped off just inside the top of the head where it feeds in. I don't know why this has happened.

    Does anyone know how I can get the Filament out of the head,...
    See more | Go to post

  • This is not true. There are MANY pre-assembled devices on the market for under $1,000. I paid $960 for a pre-assembled Wanhao Duplicator 4S. Before that, I bought a $750 Da Vinci 2.0 Duo. I would not recommend the Duo to anyone, but the point remains. Even the Printrbot Simple you mentioned can be had pre-assembled for $700....
    See more | Go to post

    Leave a comment:

  • Spartan26
    started a topic Need Help: Slicing software

    Slicing software

    I have an XYZ da Vinci 2.0A Duo and would really like a better slicing software as XYZWare just doesn't offer the settings I would it to offer. What are some free options?
    See more | Go to post

  • hunterjwizard
    started a topic Immediate filament jams

    Immediate filament jams

    Hi folks,

    I have a Da Vinci 2.0 Duo that's currently enjoying instant filament jams and issues heating the right extruder. Its possible the part is bad, but I am not ruling out software. A week ago I had this problem and fixed it by ditching XKZ-Ware and buying Simplify 3D. Unfortunately, now it's back with a vengeance.

    If I load the filament, I can see a stead stream come out of the extruders. In fact, when I tell the unit to print, the first thing it does is eject...
    See more | Go to post

  • keiran.whitfield
    started a topic new to this 3d printing world

    new to this 3d printing world

    Hi all, I'm Keiran and new to this 3d printing, I have a xyz da vinci duo 2.0a. Iv had it a for a few months now and still getting to terms with it.

    I would like to start printing peoples designs and maybe if I get the time start designing stuff myself.
    See more | Go to post