No announcement yet.


26 results in 0.1057 seconds.
creality ender 5

  • danols
    started a topic ender 5 prints dont stick anymore

    ender 5 prints dont stick anymore

    hi, got a cr10 mini a few weeks ago, and was having so much fun with it, so when I got a good deal on a ender 5, I bought it, first 5-6 prints was great, stuck to the bed without any problems, or adhesive, now, I get warping in the beginning on every print, when starting with the skirt.
    I dont feel that its a leveling issue, since Im used to leveling the cr10, no problems there, I tried using some of the adhesive I use on the cr10 bed on the ender 5, made no difference, plus when I stop the...
    See more | Go to post

  • Ender 3 Pro quality,safety tips and tech support issues

    Hi gays this is a post about a new Ender 3 pro printer that i purchased this year from creality 3d store. This official store advertised that all printers are assembled and checked before shipping to customers . So i was in that regard sure that i will get a printer, that is safe to use and
    perform in use as expected.
    Also many sites are making a fuzz about how good this printer actually is,and many of these site are payed reviews,so they will advertise the good stuff but not the...
    See more | Go to post

  • Ender 3 Pro Extruder Stepper debugging - sanity check?

    Hi. New member here with a real head scratcher. I'd really appreciate any advice.

    I have an Ender 3 Pro, sold by Sain Smart, which I believe is an OEM of Creality. It seems to be identical to a Creality unit, other than the printing on the metal and some graphics on the LCD (presumably custom firmware).

    This all started with problems with the filament not feeding smoothly such that the extruder stepper would slip back with a loud "chunk". I determined that the...
    See more | Go to post

  • Ender-3 Pro BLTouch not retracting + LCD issues

    Good morning all

    I 've recently installed the BLTouch V3 on my Ender-3 Pro, but I'm having trouble getting it to work.

    I've triple checked all of my connections and I've paid close attention to the installation videos on YouTube from Teaching Tech & Creality.

    When I power on the printer, the BLTouch probe pulses a few times and the LED stays red, but the probe does not retract when an obstruction is detected.
    It would have crashed into my print bed...
    See more | Go to post

  • sediki
    replied to Help with Ender 5
    I don't know if you still need help with this. I am guessing since it is from 2 months ago you may have resolved it, but I'll give my 2 cents in case someone else has the same problem. Keep in mind I am a newbie myself. Just got Ender 5 Pro two weeks ago.

    The Ender 5 has only one set of sensors; all at the origin, so if you disable the stepper motors and move them manually, it will lose track of where it is and when it starts to move it might hit the other end and keep trying to move...
    See more | Go to post

    Leave a comment:

  • Ender 5 Pro - Can't Connect to PC for BLTouch Firmware Update

    Hello all, this is my first post. I recently picked up a slightly upgraded Ender 5 Pro from amazon as my first printer. I have it set up and after some belt tweaking and bearing adjustment it is printing very nicely. I want to ad the BLTouch, and have the Creality kit labeled for V1 Mainboard. I have several questions, and I can't find any specific solutions to the Pro version, which I think has built in bootloader.

    First, the kit comes with a USB ISP cable and interface, but I'm not...
    See more | Go to post

  • Strifey7
    started a topic Brand new Ender 5 pro Disaster

    Brand new Ender 5 pro Disaster

    Hello everybody.

    I received a brand new Ender 5 Pro a few days ago. I assembled the printer and leveled the bed and tried a test print. The first problem was that the z axis moved only a half of what it should have moved. I managed to fix that with information on internet and adjusting the steps/mm settings that were off. After that I managed to print a perfect benchy. That was one of the few prints I managed to print successfully.

    During next 10 prints at some random point...
    See more | Go to post

  • Hey Nigel, well I finally ordered the new board and I expect I'll get to install it today, so I'll post the outcome hopefully this evening. I ordered the: Creality Original V1.1.5 Motherboard Silent with TMC2208 Stepper Motor Driver for Ender-3 /Ender-3 Pro/Ender-5

    See more | Go to post

    Leave a comment:

  • Aped
    started a topic Help with Ender 5

    Help with Ender 5


    First off I am a complete newb to 3D printing so please excuse what will undoubtedly be a post about dumb problems but I am so disappointed/frustrated/stumped with what to do. and after receiving no help from Creality themselves I have decided to reach out for help.

    So here is my story.....
    I recently (Feb 2020) acquired a Creality Ender 5. after unboxing and following all steps to set up the printer I decided to do a test print which worked perfectly and I was...
    See more | Go to post

  • Creality Big Enclosure for CR10/Ender-3/Ender-5 Aluminum Foil, Flame Retardant

    See image, test won't fit!
    See more | Go to post
    Last edited by efcknobby; 05-10-2020, 07:23 PM.

  • 3D_Reality
    replied to Creality Spare Parts?
    Thanks for dropping by -- I appreciate the input ;o)

    All said, there are still model-specific parts which can't be interchanged without a fight; and may require fabrication work to replace if lost/damaged. Plates, certain brackets, shafting, custom component boards, even pulleys (such as the Ender 5's 6mm GT2 24 groove oddballs) represent a challenge if the OEM doesn't make spares available.

    Speaking of the Ender 5, this looks like a pretty fair prospect for the work which...
    See more | Go to post

    Leave a comment:

  • GrantB
    replied to Ender 3 Extrusion Issues
    The Ender 3 may suffer the same issues that other similar machines do.
    Ender / Tronxy & Creality are all rips of each other.... I believe Hicktop are the original manufacturers of this particular i3 generic machine - all sharing the same mechanics.

    OK, the issue may be simple to establish.
    Firstly, get a STL file for a simple cylinder from have zero infill, set the layers to 0.2mm height.
    Duplicate these for 5 positions on the print bed - so.........
    See more | Go to post
    Last edited by GrantB; 04-22-2019, 02:06 PM.

    Leave a comment:

  • JoeP
    started a topic 3D printer gets blocked frequently

    3D printer gets blocked frequently

    I'm trying to print a simple design using a Creality Ender 3 (PLA+ filament, 220 degree nozzle, 60 degree glass bed). Every couple of layers, the plastic stops coming out of the nozzle. When I unscrew the Teflon tube and pull the filament out (without turning off the heater element), the end is a solid cylinder, about 5mm in diameter and a couple of cm long. When I cut that off and screw it back in again it works fine for about 5 minutes, then it happens again. What's going wrong here?
    See more | Go to post

  • Jafpcu
    replied to Yet another newbie.
    Just finished assembling the Creality Ender-3 Pro.
    Going through the "Quick Start Guide" from the SD card.
    Finished step 4, bed leveling.
    Step 5, Software Installation. Two versions of Cura included, 3.0.2 and 15.04.3. ... and after a Google search, it would seem that version 3 is NEWER than version 15. WTF???
    Oh, and I'll be ordering an auto-leveling kit today!
    See more | Go to post
    Last edited by Jafpcu; 12-17-2018, 09:09 PM.

    Leave a comment:

  • justinmreina
    started a topic Selection of part in Creality Slicer

    Selection of part in Creality Slicer

    I just got an Ender-5 Pro from Creality, and its great. Using it often but have an issue, how do you select a part on a bed with multiple parts?

    • Say my print bed holds three objects, A, B & C inserted in that order
    • I can move 'A' around here just fine but am not able to select B or C to move, how is this done?

    Here is my print bed for ref - ...
    See more | Go to post