No announcement yet.


9 results in 0.1140 seconds.
creality ender 5 pro

  • Aped
    started a topic Help with Ender 5

    Help with Ender 5


    First off I am a complete newb to 3D printing so please excuse what will undoubtedly be a post about dumb problems but I am so disappointed/frustrated/stumped with what to do. and after receiving no help from Creality themselves I have decided to reach out for help.

    So here is my story.....
    I recently (Feb 2020) acquired a Creality Ender 5. after unboxing and following all steps to set up the printer I decided to do a test print which worked perfectly and I was...
    See more | Go to post

  • Ender 3 Pro Extruder Stepper debugging - sanity check?

    Hi. New member here with a real head scratcher. I'd really appreciate any advice.

    I have an Ender 3 Pro, sold by Sain Smart, which I believe is an OEM of Creality. It seems to be identical to a Creality unit, other than the printing on the metal and some graphics on the LCD (presumably custom firmware).

    This all started with problems with the filament not feeding smoothly such that the extruder stepper would slip back with a loud "chunk". I determined that the...
    See more | Go to post

  • Strifey7
    started a topic Brand new Ender 5 pro Disaster

    Brand new Ender 5 pro Disaster

    Hello everybody.

    I received a brand new Ender 5 Pro a few days ago. I assembled the printer and leveled the bed and tried a test print. The first problem was that the z axis moved only a half of what it should have moved. I managed to fix that with information on internet and adjusting the steps/mm settings that were off. After that I managed to print a perfect benchy. That was one of the few prints I managed to print successfully.

    During next 10 prints at some random point...
    See more | Go to post

  • Ender 5 Pro - Can't Connect to PC for BLTouch Firmware Update

    Hello all, this is my first post. I recently picked up a slightly upgraded Ender 5 Pro from amazon as my first printer. I have it set up and after some belt tweaking and bearing adjustment it is printing very nicely. I want to ad the BLTouch, and have the Creality kit labeled for V1 Mainboard. I have several questions, and I can't find any specific solutions to the Pro version, which I think has built in bootloader.

    First, the kit comes with a USB ISP cable and interface, but I'm not...
    See more | Go to post

  • Hey Nigel, well I finally ordered the new board and I expect I'll get to install it today, so I'll post the outcome hopefully this evening. I ordered the: Creality Original V1.1.5 Motherboard Silent with TMC2208 Stepper Motor Driver for Ender-3 /Ender-3 Pro/Ender-5

    See more | Go to post

    Leave a comment:

  • Jafpcu
    replied to Yet another newbie.
    Just finished assembling the Creality Ender-3 Pro.
    Going through the "Quick Start Guide" from the SD card.
    Finished step 4, bed leveling.
    Step 5, Software Installation. Two versions of Cura included, 3.0.2 and 15.04.3. ... and after a Google search, it would seem that version 3 is NEWER than version 15. WTF???
    Oh, and I'll be ordering an auto-leveling kit today!
    See more | Go to post
    Last edited by Jafpcu; 12-17-2018, 09:09 PM.

    Leave a comment:

  • justinmreina
    started a topic Selection of part in Creality Slicer

    Selection of part in Creality Slicer

    I just got an Ender-5 Pro from Creality, and its great. Using it often but have an issue, how do you select a part on a bed with multiple parts?

    • Say my print bed holds three objects, A, B & C inserted in that order
    • I can move 'A' around here just fine but am not able to select B or C to move, how is this done?

    Here is my print bed for ref - ...
    See more | Go to post

  • jmmrly
    started a topic Beginner Printer

    Beginner Printer


    I'm looking at purchasing a 3d printer as a beginner. I'm brand new with 3d printing but I want to have a play around.

    I've had a look at a couple of the cheaper ones such as the ones listed below but I'm not sure which one is the best or if I should be looking for something else maybe a little pricier?
    I didn't find these listed in the sticky so dunno if they're any good.

    See more | Go to post

  • Juliet_sierra
    started a topic BTT SKR 1.4 Turbo installation problems

    BTT SKR 1.4 Turbo installation problems

    Hi, First post to the forum.

    I have a Creality Ender 5 Pro and have decided to upgrade the motherboard to the Bigtreetech SKR 1.4 turbo ( I've been following the teachingtech tutorial on youtube and have managed to get the firmware compiled and transferred to SD card.

    Unfortunately, when I turn the printer on after connecting all the cables I get a loud constant beep from the LCD, the screen is illuminated but it's...
    See more | Go to post