Announcement

Collapse
No announcement yet.

Search

Collapse
26 results in 0.0221 seconds.
Keywords
bl touch
Members
Tags
  •  

  • BL Touch installation instructions for CR-10 V2

    So I purchased the BL Touch upgrade for the CR-10 V2 and quickly found out that there are not a cohesive set of instructions available on Creality's site. The video is helpful but there are some steps and explanations left out. Once I finally figured it out and had it working I wrote down the steps that I went through. Please do not take the following steps as gospel and I am not responsible for any damage caused if you do follow these instructions. These are just the steps that I took and though...
    See more | Go to post

  • bigcity204
    started a topic BL touch probing

    BL touch probing

    hey so i am a newbie i guess i call my self a newbie but i installed my bl touch everything working great only problem is probing is super slow any way to speed it up and please use easy to understand terms of what to do as i am a newbie thanks
    See more | Go to post

  • coolkid
    started a topic Add bl touch to 3d printer

    Add bl touch to 3d printer

    I have a adimlab 3d printer how can I add a bl touch...
    See more | Go to post

  • Robw50
    started a topic Creality firmware

    Creality firmware

    I'm looking for firmware version 1.70.0, non-BL touch.

    I have two Creality CR-10S Pro's. They are version 1, so they have a z level sensor, but it's not a BL touch probe like the version 2 has. They were delivered with different firmware versions. The earlier version on one printer is more versatile, so I'd like to install the earlier version on the other printer.

    Does anyone have the 1.70.0 .hex firmware file for a CR-10S Pro, version 1 (non-BL Touch)?
    See more | Go to post

  • sewcial
    started a topic New to 3D_Creality CR10v2 & BLTouch

    New to 3D_Creality CR10v2 & BLTouch

    I just got my first 3D printer, Creality CR-10V2. Assembly was easy and all seemed to be going well. I printed a few simple things I found on Thingiverse (a few frames for face shields and a cookie cuter). I decided to order a BL Touch to avoid checking bed level each time. Installing the touch was also easy, but now my settings are a mess and I have no idea how to fix it. Does the BLTouch have to set auto home to somewhere near the center of the bed? Does BL Touch just reset the home position?...
    See more | Go to post

  • No easy answers here unfortunately. It worked then you and he decided to mod it with the skr board, e3dv6, bl touch, and octopi, and it hasn't worked correctly since. Troubleshooting is a chain and you have to isolate/remove and replace 1 link at a time until the problem changes or disappears. The issue here is you have done what we all have done, and modded so many things that your chain is in knots. You could keep trying and eventually get all this running but I'm not sure where to start troubleshooting...
    See more | Go to post

    Leave a comment:


  • MadeBye
    replied to Ender 3
    Take a look at th3d unified firmware from https://th3dstudio.zendesk.com/hc/en...th3dstudio.com for ender 3 as it supports the bl touch. The fw is actively developed and is well sorted out. I used the U1.R2.1d version for a long time before I went to klipper fw strictly for faster speed, but I don't have a bl touch or any auto bed leveling. Also not to send you down a rabbit hole, but some of the ender 3 boards come without a bootloader installed so you have to...
    See more | Go to post

    Leave a comment:


  • New Member from Southern California area

    Good Afternoon. I just took the plunge into the 3D printing world and just pressed the buy button on a Creality CR-10 V2. I was not able to purchase from the approved original Creality site as these were out of stock so took a chance on a re-seller site that has been controversial just because some people that have ordered from this site have had issues but I just could not find one from a (what seems to be) authorized sites. Some people have not had issues with the aforementioned site and some...
    See more | Go to post

  • Hawkeyetim
    started a topic Bed Leveling but with no Z axis movement
    in Anet

    Bed Leveling but with no Z axis movement

    Hi

    I was happily printing was my A8 since Xmas then (foolishly) I decide to upgrade to a BL Touch and every since I've had problem after problem, the latest issue I've been struggling with for the last week or two is that I'm correctly creating a mesh (i think) but when I try to print I would have expected the Z axis to move very slightly as its laying down each layer but no movement is seen and the print is never level across the bed. Below is a list on things I've checked or setu...
    See more | Go to post

  • colbrit
    replied to Hello form Arizona!
    Hi Joe, welcome to the forum and the some times frustrating but enjoyable world of 3D printing. I have been playing around with 3D printing for a year or so and am still learning. I have a Anet A8 which came with no auto bed levelling and I managed to produce some good projects. After time I decided to update and add a 3D Touch which is similar to the BL Touch and I have experienced quite a lot of trouble trying to get the exact adjustments and just when I think I have got there something goes wrong....
    See more | Go to post

    Leave a comment:


  • colbrit
    replied to New to the forum
    Hi Rick, After reading your post I had a look at the ET4 online and was very impressed. It looks a stronger more robust unit than the A8 and to make matters worse I want one now too. The problem you are having is similar to one I had when I fitted a BL Touch to my A8 and in my case it was the setting of the Z offset which was set on the printer using the screen. The firmware was Marlin is that the same with the ET4. I noted that the leveller is a light sensor type and not a touch so I might be leading...
    See more | Go to post

    Leave a comment:


  • Marchie
    replied to Add bl touch to 3d printer
    Hi Coolkid, not familiar with your printer but you should be able to fit BL Touch. Check YouTube, loads of vids on fitting sensors to 3d printers.
    It's even easier if your running Marlin software. Version 1.1.9 has BL Touch....
    See more | Go to post

    Leave a comment:


  • Ghoster
    replied to Ender 3
    Hi. Did you manage to install the BL touch. I am having trouble with the bootloader as it is corrupted or no longer works on Windows 10....
    See more | Go to post

    Leave a comment:


  • Help with my strange printer

    Thank you for letting me join, I am genuinely hoping someone can help me. (Apologies in advance for the long post)

    I had an old A8 printer that pretty much failed and got put in a cupboard for 3 years. I was then given an old and broken printer with a Polish board that I managed to get working by using some A8 components and with the help of a kind guy from the A8 group.

    We got it working and he advised me into getting a PoPprint SKR V1.1, a v6 nozzle, a BL Touch and Octopi....
    See more | Go to post

  • bobbys
    started a topic Hi everybody

    Hi everybody

    Hi everybody im new to 3d printing have just got a creality cr10 v2 with bl touch and am using kisslicer and free cad to make models and things and i am hoping that joining the forum will help me get better results in the future
    See more | Go to post
Working...
X