Announcement

Collapse
No announcement yet.

Filament quality

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Filament quality

    Hi everybody. I got a new 1kg roll ABS filament from a local supplier.
    When I took it out of the plastic I felt straight away that the filament was not round.
    I measured 2.63 to 2.86 mm. As the filament also looked different from other suppliers I broke it and found a hole of about 0.8mm inside the material. I broke it again after about 1m and the hole was still there. So it is a tube and it wasn't just a bubble.
    Has anyone experience with this sort of filament? Should I use it at all with the air inside?
    Thanks

    #2
    I definitely recommend tossing that or contacting the supplier for a replacement. Printing with filament that out of spec will result in very poor prints and more than likely filament jams causing you more headache than what it is worth.

    Comment


      #3
      Thanks. I think you are right. I was going to adjust the diameter in the software to 2.6mm but the air could be a problem and I don't know how far this hole reaches into the roll. Hope they take the filament back. I am not buying there again.

      Comment


        #4
        Hi Herman,

        It sounds like you bought a really bad roll of filament. As suggested above you might want to throw that away.

        There are many retailers of filament around. Some offer high quality filament (us) whilst others go for cheap filament.

        It is best to shop around and experiment.

        Feel free to get in contact with us if you want to buy some of our high quality filament. More information is on our website at www.3dexfilament.co.uk

        Regards,
        3DEX
        Will @ 3DEX Ltd / www.3dexfilament.co.uk

        Comment


          #5
          I needed something quick and bought Real Filament locally. The supplier took it back. I usually got Colorfabb from Holland (VERY GOOD STUFF) and from 3dprima also very good. I didn't know about you and your website but will check it soon. I just ordered in Sweden again and have loads of stock now. Thanks for your info.

          Comment


            #6
            Hi, Herman If you're looking for a wide-variety of good quality filaments, you might want to check this website. We've been using it as reference for our business as It's has all the information you need for 3D printing and products such as filaments. Since they're offering various kinds of the said product (from eco-friendly, to odorless to lightweight), you can compare and choose which one is perfect for you.
            3D Filaments are materials used for 3d printing. There are different kinds of 3D filaments such as ABS, PLA, PVA, PETT, HIPS, Nylon, Wood, Magnetic, Sandstone..
            Last edited by kevisprint; 05-08-2017, 02:02 PM.

            Comment


              #7
              this reviews about 3d printing filament
              https://www.3dprintmanual.com/best-3d-printer-filament/

              Comment


                #8
                Please do not attempt to print with such bad-quality filaments as you would never get the desired outcome. Instead, either return it to the concerned person or get a new one by checking it thoroughly.

                Comment


                  #9
                  I have been buying filament and seeing which is the best for the price. Filament can be costly. I recommend www.3Dmagicwand.com , they filament is high quality and the tolerance is +-0.02mm for $16 I got 1 kilogram spool and got Free shipping when I got 2. There is a discount code spring2018 at checkout to save. They ship free to USA and Canada. I'm not sure about Euro. I've been getting good results and the prices are really fair

                  Comment

                  Sign Up

                  Collapse

                  To post a reply to this thread you must be a member. Registration is fast, simple and absolutely free. Please join our community today!
                  Working...
                  X