Announcement

Collapse
No announcement yet.

Tuning Monoprice Maker Select V2 Help (Same thing as Wanhao duplicator i3)

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Tuning Monoprice Maker Select V2 Help (Same thing as Wanhao duplicator i3)

    I recently got my Printer up and running again and tried to print a 20x20x20mm calibration cube, it successfully printed most of the way... sorta, ill add some pictures and maybe someone can tell me what I can do to improve, thanks!
    I am using PLA filament with a 200 Degrees on the nozzle and 60 on the Hot bed.

    #2
    Hi Riman,

    I guess that the cube should had have a complete filled sides. So I would say that the extruder haven't been provided the needed filament needed for the print.
    Either the extruder is clogged or something else is wrong with it.

    Also a well know issue with the MP Maker Select is that the filament holder is braking the flow of the filament.
    what I have done to this is printing and installing these mods:

    Maker Select V2 , Filament Guide by rvncto
    https://www.thingiverse.com/thing:3162659

    V2 Spool Holder Mod w/ Ball Bearings by The1ck <<--- Before you install this be sure to have a filament guide or else you will run into other problems.... too much filament.
    https://www.thingiverse.com/thing:2936985


    BR Ener_dk
    MP Select Maker V2

    Comment

    Sign Up

    Collapse

    To post a reply to this thread you must be a member. Registration is fast, simple and absolutely free. Please join our community today!
    Working...
    X