Announcement

Collapse
No announcement yet.

Problem with extruder on MB 5th Generation

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem with extruder on MB 5th Generation

    Our client have a problem with smart extruder (type 12.2.1) on his printer. Model of printer is MB 5th Generation 3D printer, and the printer is new.
    When he like attaching an extruder, the printer make an error about extruder attachment.
    Only when put a plastic tail around an extruder, printer recognized it.

    I tried with different type of extruder, but the problem is the same.
    I check connector pins, but they are OK
    Firmware is up to date.
    * The air plenum on bottom of extruder is missing (see attachment) . Is this a possible reason about the problem?

    Regards
    Attached Files

  • #2
    If you receive an attachment error regardless of which compatible smart extruder you attach then this would suggest that there is an issue with the connections on the machine side. You should clean these and see if it improves your connection.

    www.idig3dprinting.co.uk Your one stop, 3D printing shop

    Comment


    • #3
      Thanks for the reply. We clean connectors on the machine side, but the problem still there. My opinion is that the problem is the distance between extruder and machine, and the pins can't connected each other.

      Comment

      Sponsors

      Collapse
      Working...
      X