Announcement

Collapse
No announcement yet.

Decision for object - MakerBot Replicator Z18

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Decision for object - MakerBot Replicator Z18

    Hi,
    I have a problem with the finished object. When the object is ready, i see some "problem", some kind of sewing. I think this is option from printer. Can you help me. I use MakerBot Desktop. Changed some settings like "Ooze distance - 0,10 is default, change to 0,01", also change Minimum Ooze Path leght from 0,10 to 0,01 - start print preview, and the problem is missing, but when the object is finished, the problem is there.

    I attached a picture!

    Best Regards
    Attached Files

  • #2
    Looks like you posted this in two different spots. Here is my reply to your other post:

    That is your seam. It is where each layer starts and stops and is inherent to the printing FDM printing process. It is especially noticeable with cylinder type objects. Some printer software will allow you to scatter these around the model or choose the position so it isn't as noticeable on some models. Not sure how this works in Makerbot Desktop.

    Comment


    • #3
      Chech here

      https://www.makerbot.com/support/new...usion_profiles

      Comment

      Sponsors

      Collapse
      Working...
      X