Announcement

Collapse
No announcement yet.

Makerbot Replicator 2 Heater Cartridge Wattage

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Makerbot Replicator 2 Heater Cartridge Wattage

    I broke my heater cartridge trying to remove it during a hot end block replacement. I've been searching all over the place and found replacement heater cartridges for ~$7, but am unsure of what to get. There is a 30W or 40W heater with same dimensions. Does the Makerbot Rep 2 have a 30w or 40w heater?

  • #2
    https://groups.google.com/forum/m/#!...ot/-jvJKAdTRag

    Looks like 40 watts. This is all I could find on it though.

    Hope this helps.

    Comment


    • #3
      Originally posted by ARKtest View Post
      https://groups.google.com/forum/m/#!...ot/-jvJKAdTRag

      Looks like 40 watts. This is all I could find on it though.

      Hope this helps.
      Thank you! This was more than I could find and I had searched on/off for a week.

      Comment


      • #4
        No problem at all. Glad I could help.

        Comment


        • #5
          I contacted Bilby3D and was told the following product would work.

          https://www.bilby3d.com.au/DispProd....tHeatCartshort

          However, after rereading your find, I found that MakerFarm has the heater I need for only 4.5 minus a molex male 2 pin connector.

          http://www.makerfarm.com/index.php/2...-hot-ends.html

          I like the $4.5 instead of $37.5

          Comment


          • #6
            I'm sure if anyone else has your problem they'll be glad you asked. Glad to help.

            Comment

            Forum Sponsors

            Collapse
            Working...
            X