Announcement

Collapse
No announcement yet.

Infill/overlap

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Infill/overlap



    Hi all, generally speaking, my Felix V2 is working pretty well, I've made various modifications to it and now I can send a print to it and it makes it, always a bonus with 3d printers.

    Of course, there is always tweaking to be done, something that keeps occuring is visible in the pictures, there is a gap between the perimeter and the infill, I have "overlap" set to 25%, do I need to increase this?

    I'm using a 0.4 nozzle, 0.2 layer height and "vertical shells" set to 3 in Slic3r.

    Any advice would be greatly appreciated.

  • #2
    For me it looks like you have one extra perimeter or one of the perimeter lines missing. In my opinion overlap is not at fault here. Maybe you could upload G code to see how slicer made everything?

    Comment

    Sponsors

    Collapse
    Working...
    X