Announcement

Collapse
No announcement yet.

post processing of 3d printed part

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    post processing of 3d printed part

    FDM is best suited for cost effective prototypes produced with short lead time. Layer lines are generally present on FDM prints making post processing an important step if a smooth surface is required. Some post processing methods can also add strength to prints helping to mitigate the anisotropic behavior of FDM parts.

    This blog will discuss the most common FDM post processing methods.

    1. Support removal

    Tool kit
    • Needle-nose pliers
    • Dental pick set
    2. Sanding

    Tool kit
    • 150, 220, 400, 600, 1000, and 2000 grit sandpaper
    • Tack cloth
    • Toothbrush
    • Soap
    • Face mask
    3.cold welding

    Tool kit
    • Acetone
    • Foam applicator
    4.gap filling Tool kit

    • Epoxy resin (only for small voids)
    • Autobody filler (for large voids and joining)
    • ABS filament & acetone (only for small voids and ABS prints)
    5.polishing Tool kit

    • Plastic polishing compound
    • 2000 grit sandpaper
    • Tack cloth
    • Toothbrush
    • Buffing wheel or microfiber cloth

    Thanks & Regards

    Shivnath purty
    J GROUP ROBOTICS
    MUMBAI















    #2
    And this is useful some how?

    Comment


      #3
      Somehow?????????????? Why????

      Comment


        #4
        The given description is very useful and it really helped me a lot. The details have to be followed by the users and the main thing is that if the user does not know the process then it will be difficult to post the 3d printed part.
        Dial iTunes Support Number +1-888-619-0842 If you see error 9 while updating. Connect iTunes Customer Service to get resolved all issues.

        Comment

        Working...
        X
        yobit