Announcement

Collapse
No announcement yet.

needed help for 3d printer development

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    needed help for 3d printer development


    Click image for larger version

Name:	WhatsApp Image 2019-02-05 at 8.02.03 PM.jpeg
Views:	1
Size:	172.0 KB
ID:	120557
    Hi,
    I don't know is the right place to ask, We have been developing a Hbot Cartesian 3d printer. The project is in the testing stage
    the following are the specifications
    - Bed size: 750x750x750
    - Control board: MKS S bord
    - Firmware used: Smoothieware
    - Leveling sensor: Geeetech auto leveling sensor
    - Software used: Repetier Host

    There are some issues regarding our development.
    In our case, the Z+ port is connected to the bed leveling sensor. In the configuration file, the direction of limiting switch is from "home to min". The homing is ok but while using manual control mode in repetier software, the warning message is coming "one fatal error" when Z+ is hit.

    Thanks


Sign Up

Collapse

To post a reply to this thread you must be a member. Registration is fast, simple and absolutely free. Please join our community today!
Working...
X