Announcement

Collapse
No announcement yet.

The Cheapest 3D Printers Compared

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #51
    All over the world you can find many cheap 3d printers. You can find a list of best 3d printing pens from $38 to $99, some goes as low as 38$, you should check it out here: http://www.allthat3d.com/3d-printing-pen/
    Last edited by ChristianSpringer271; 04-28-2016, 07:20 AM.

    Comment


      #52
      Comparing cheap 3d printers is going to help do what? If all you want is a $250 printer, buy a glue gun.

      Comment


        #53
        Here is The best
        all in one printer under 200
        you need to visit for more.

        Comment


          #54
          i've found this one cheap http://shop.prusa3d.com/en/3d-printe...grade-kit.html
          would anyone recommend it or it is not worth buying?

          Comment


            #55
            Have you heard of Novio 3D Printer? They are offering a $399 3D printer which seemed nice. Check it here http://www.novio3d.com/

            Comment


              #56
              one thing I would Advice to the readers is that 3D printers and 3D pens are two different things, people often get confused in this thing. If you are thinking to buy the easy-to-use pens, here is the detailed guide to it http://mobilesiri.com/best-3d-pens/

              Comment


                #57
                The cheapest i think is 101Hero http://www.101hero.com/. $79.00 for the normal one and $89.00 for the developer version. It started as $49.00 on kickstarter but if you look at the comments, some of the backers did not get any of the printer yet or they have defective stepper motors. Im one of the lucky ones that order on their website and received the printer after 2 months after their release dates. I have a problem on working the right configuration as some of the test prints turns out fine and some is just a blob of plastic.

                Comment


                  #58
                  i need help for choosing 3d printer from this list : http://www.3dprintmanual.com/best-cheap-3d-printers/
                  note : my budget 300$
                  Don't miss Cheap 3D Printer under 500, find out the best prices and reviews of the Best Cheap 3D Printers ever here you find 3D Printer for sale from AMAZON

                  Comment


                    #59
                    My friend has a website they have information about 3d cheap printers
                    Check out below to find cheap 3d printers for under $1,000 USD. If you want to engage in 3D printing but your budget holds you back, it is time that you develop a new perspective about 3D printers. A decade ago, 3D printers cost over $100,000 when it is not as popular as it is

                    Comment


                      #60
                      Does any one use 3D printer made in China?

                      Attached Files

                      Comment


                        #61
                        I'm surprised not to see the TronXY X1 here. Mine cost £155 shipped, in kit form. The kit is fraught with problems, but if you're at all handy, the printer you end up with is highly competent. Here's my build video in case anyone's interested.
                         

                        Comment


                          #62
                          Tell me any 3D printer which printing quality is good and price are below 300-400$

                          Comment


                            #63
                            TronXY X1 - if you're handy and get get around the crappy kit quality, then you;'ll have a SUPERB printer for about £160. See my build video above your post for more.

                            Comment


                              #64
                              I never knew that I could get a 3D printer for $100. Having read this, I now look forward to see how it works.

                              Comment


                                #65
                                thanks for sharing the list of 3d printers recently we have compiled the list of best 3d pens like 7TECH 3D Printing Pen with details review .
                                Want to buy the best 3D printing pens? The technology is quite advancing day by day and with the introduction of modern tech in the world, it is quite overthrowing the old ones and that too on a rapid rate. The things which you would have wanted years ago is now actually right in front …

                                Comment


                                  #66
                                  For one that “just works” flashforge finder. Under $400 and just works great. I have two.

                                  Comment


                                    #67
                                    Think about it; rather than creating two-dimensional pictures on a piece of paper, you can now transform your imagination into reality. Also, the act of using a 3D pen sure is fun! https://10hightech.com/best-3d-pens/
                                    Buying a quality 3D Printing pen is hard, especially if you are a beginner, can be tricky. This is why we have reviewed a list of the ten best 3D pens.

                                    Comment


                                      #68
                                      This is an awesome thread im going to do some more research and post later if I find something for you guys
                                      Last edited by creatorgirl13; 11-11-2019, 10:22 PM.

                                      Comment


                                        #69
                                        these are some great printers! This helped me so much thank you to everyone who added something in here, I came across this sick video that talks about some other printers https://www.youtube.com/watch?v=MWjiUCq2AA0

                                        Comment


                                          #70
                                          Before choosing a 3D printer, maybe it might be useful knowing something more about the functioning of 3D printing technology and FDM printers.

                                          Indeed, picking a cheap 3D printer without knowing what are the minimum requirements to get decent printing results might be a waste of time and money. You will pass more time fixing issues instead of printing. There are a lot of guides comparing 3D printer brands and models. However, I'd like to suggest having a look at this 3D printing buying guide, which provides an in-depth analysis of the main specs you should look after to.

                                          Choose wisely and happy printing.

                                          Comment


                                            #71
                                            I have looked at several. For the cost, you can't beat Kingroon at $139, but for me, you are gonna spend $139, I would spend a few extra bucks and for $169 get the Tronxy XY-2.

                                            Then again, for $206, you can buy the Creality Ender-3. It has a much more widespread user base to help.

                                            If you want easy to use and supportive user-base, go with a Prusa MK3S and Prusa Mini. The mini is only $349 and is well worth the price.

                                            Comment


                                              #72
                                              We provide 3D printing services and a variety of 3D printers, If you are interested in our products, please feel free to leave a message or contact us for a quotation.
                                              Learn more:https://www.mtxlaser.com/
                                              Contact us:sales@mtxlaser.com
                                              Call:+86-15989859484

                                              Comment


                                                #73
                                                We provide 3D printing services and a variety of 3D printers, If you are interested in our products, please feel free to leave a message or contact us for a quotation.
                                                Learn more:https://www.mtxlaser.com/
                                                Contact us:sales@mtxlaser.com
                                                Call:+86-15989859484

                                                Comment

                                                Working...
                                                X