Announcement

Collapse
No announcement yet.

Layer separation occurs after halfway print

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Layer separation occurs after halfway print

    Hi Gents,

    im a beginner at 3d print, I had tried to print out my 3d print model and layer separation was occurs in halfway print, i did try to adjust the temperature and filament flow but is still the same. here att ached with some setting and printed model photo, pls give some advice. thanks
    Click image for larger version

Name:	IMG_20200109_224157.jpg
Views:	8
Size:	1.08 MB
ID:	124722Click image for larger version

Name:	IMG_20200109_224228.jpg
Views:	8
Size:	803.8 KB
ID:	124724Click image for larger version

Name:	Capture-2.JPG
Views:	9
Size:	62.3 KB
ID:	124726
    Click image for larger version

Name:	Capture-5.JPG
Views:	7
Size:	25.1 KB
ID:	124728Click image for larger version

Name:	Capture-4.JPG
Views:	7
Size:	49.7 KB
ID:	124730

    thank you very much

    will
    Attached Files

    #2
    What printer are you using, I would say that maybe your stepper drivers are over heating and losing steps after it's been running for a while, since i seems to be occurring at the same point. Have you watched it happen? May shed more light on the issue.

    Comment

    Working...
    X