Announcement

Collapse
No announcement yet.

Cr10-5s bed leveling

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cr10-5s bed leveling

    I have a new CR10-5s and am concerned about the bed leveling. on two different prints the first layers of material was noticeably thick on one side. in my investigation i rechecked the bed level and it appeared to have changed slightly from the previous print. the printer does not have any autolevel checks. is the bed leveling something i am going to have to perform on every print?
Working...
X