Announcement

Collapse
No announcement yet.

Constantly drifts during print. Continues to shift and lean along Y axis, .

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Constantly drifts during print. Continues to shift and lean along Y axis, .

    Flash Forge MP Inventor II, Print Leans When it Shouldn't & Layers Don't Line Up Well are .The shift is a continual shift, not just a single layer. It happens most often when the print is large, has supports, is a multi print of same objects, or adjust the print rotation or angle from original file. It is not every time but it is 1 in every 3 prints on average. See pics for the average failed print along these lines.

    Basically the entire print begins to shift back along the Y axis. I have tried tightening the belts, lubed the glide poles, releasing tension on the filament, adjusted both print speed and temp, resetting component electronic connectors, rebooting system to clear cashe, applied more adhesive to build plate, and changing the filament.

    The next thing I want to look at is the slicing program. Has anyone had issues like this with slicing programs? If so what have you done to fix it?
    Last edited by R0bperry; 03-08-2019, 12:07 AM.

Sign Up

Collapse

To post a reply to this thread you must be a member. Registration is fast, simple and absolutely free. Please join our community today!
Working...
X