Announcement

Collapse
No announcement yet.

Vesconite: New advanced self lubricating linear bushings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vesconite: New advanced self lubricating linear bushings

    Vesconite Bearings has introduced 3D polymer sleeve bushings as stock items. Printer users can now replace bronze sleeve bushings or linear ball bearings with polymer sleeve bushings produced by Vesconite Bearings.

    Initially five of the most common 3D bushing sizes will be available, namely:
    - LM6UU - 12mm (OD) x 6mm (ID) x 19mm (length);
    - LM8UU - 15mm (OD) x 8mm (ID) x 24mm (length);
    - LML8UU - 15mm (OD) x 8mm (ID) x 45mm (length);
    - LM10UU - 19mm (OD) x 10mm (ID) x 29mm (length);
    - LM12UU - 21mm (OD) x 12mm (ID) x 30mm (length).

    There are two grades available, Vesconite Hilube (White) and Vesconite Superlube (Pink), the latter having the lowest coefficient friction and thus being the superior grade.
    While other sizes are not stocked, custom bearings can be manufactured quickly and easily with custom lengths and diameters.
    The material is self-lubricating and requires no greasing, so bushings require little maintenance. Because there is no gritty grease that can get embedded in the rod’s mating surface, wear caused by constant movement of this contaminated mixture is eliminated. The absence of a metal-on-metal contact not only eliminates wear but also results in less noise. In an industry where printing can take many hours or days, this is a significant benefit for the users.

    Hilube has an unlubricated coefficient of friction on steel of 0.1, and can go as low as 0.08 on polished steel. This makes bushing movement along the rod particularly smooth and eliminates the problem of the jerky motion (stick slip) when the extruder on the 3D printer moves to a new location.
    Customers who have already installed our bearings in their 3D printers are consistently satisfied and see significant improvements in terms of print quality, wear, maintenance and noise.

    Feel free to visit our 3D printing Home page on our website - www.vesconite.com/3d-printer-bushings
    Any questions or concerns you may have, kindly to have a look at some of our FAQ’s (Frequently Asked Questions) - www.vesconite.com/3d-printer-bushings/faq


    For all other questions, suggestions and test results, of course, I am also available in this forum.

    #2
    The complete look of your internet site is remarkable, not to mention the content material!
    also visit my net web page -crypto market

    Comment


      #3
      This is a well-written press release about Vesconite Bearings introducing 3D polymer sleeve bushings as stock items. Here are the key points:

      What: Vesconite Bearings has introduced 3D polymer sleeve bushings as stock items.

      Benefits:
      • Replace bronze sleeve bushings or linear ball bearings in 3D printers from https://www.tradebearings.com.
      • Self-lubricating, requiring no greasing and minimal maintenance.
      • Eliminate wear caused by contaminated grease.
      • Reduce noise compared to metal-on-metal contact.
      • Smoother bushing movement and eliminate stick slip.
      • Improve print quality, wear, maintenance, and noise in 3D printers.

      Comment

      Working...
      X