Announcement

Collapse
No announcement yet.

Project 2 family bathroom holder

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Project 2 family bathroom holder


  • #2
    Now this is good use for a 3D Printer. It would be awesome if it was also wall-mountable, or in transparent so it blends in with the rest of the bathroom. Good job!

    Comment


    • #3
      Originally posted by nikosuser View Post
      Now this is good use for a 3D Printer. It would be awesome if it was also wall-mountable, or in transparent so it blends in with the rest of the bathroom. Good job!
      Wall mounted.. now there's a great idea. There's quite a few things i am realising i could have done better with it now. But always the way that

      Comment


      • #4
        Looks good! How long was the print? I like the wall mounted idea as well.

        Comment


        • #5
          Originally posted by AndrewBougie View Post
          Looks good! How long was the print? I like the wall mounted idea as well.
          I think it was about 5 hours, printing at 30-40mm at 0.3 height.

          I am defo going to add the wall mount to the next one, there are a couple of things I realise that are flawed with it now. The internal parts of the product reveal many unwanted marks on their mounting points on the outside of the print.

          I will print these separately I think next time, then print the internals on their own as a separate part then slot this into the main shell.

          I know many guys recommend and print at 0.2, but for the extra time needed, its just not worth the wait or power consumption for me most of the time.



          Strange looking back to only this January, I didnt even know what i single part of the printer even did when i pulled it out of the box or what an extruder was.
          Last edited by andysutils; 07-19-2016, 03:39 PM.

          Comment


          • #6
            Nice I like it. The wall mount is a great idea. One other things that I would recommend is the bottom have a few holes, or screen like grid, to allow some air flow to dry any water left on the brushes and stuff. This may already be there, I can't tell.

            Comment


            • #7
              Originally posted by wellsmic View Post
              Nice I like it. The wall mount is a great idea. One other things that I would recommend is the bottom have a few holes, or screen like grid, to allow some air flow to dry any water left on the brushes and stuff. This may already be there, I can't tell.
              No this doesnt have any holes in the bottom, But this is another very good idea wellsmic.

              I have now scrapped this model. given some of the ideas in the thread, I have started developing a brand new different model from scratch.

              Comment

              Related Links

              Collapse
              Working...
              X