Announcement
Collapse
No announcement yet.
Project 2 family bathroom holder
Collapse
X
-
Originally posted by nikosuser View PostNow this is good use for a 3D Printer. It would be awesome if it was also wall-mountable, or in transparent so it blends in with the rest of the bathroom. Good job!
Comment
-
Guest
-
Originally posted by AndrewBougie View PostLooks good! How long was the print? I like the wall mounted idea as well.
I am defo going to add the wall mount to the next one, there are a couple of things I realise that are flawed with it now. The internal parts of the product reveal many unwanted marks on their mounting points on the outside of the print.
I will print these separately I think next time, then print the internals on their own as a separate part then slot this into the main shell.
I know many guys recommend and print at 0.2, but for the extra time needed, its just not worth the wait or power consumption for me most of the time.
Strange looking back to only this January, I didnt even know what i single part of the printer even did when i pulled it out of the box or what an extruder was.Last edited by andysutils; 07-19-2016, 03:39 PM.
Comment
-
Originally posted by wellsmic View PostNice I like it. The wall mount is a great idea. One other things that I would recommend is the bottom have a few holes, or screen like grid, to allow some air flow to dry any water left on the brushes and stuff. This may already be there, I can't tell.
I have now scrapped this model. given some of the ideas in the thread, I have started developing a brand new different model from scratch.
Comment
Comment