Announcement

Collapse
No announcement yet.

Ender 3 Pro Infill Problems

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Ender 3 Pro Infill Problems

    So I am kind of new to the 3D printer world. I now have the Ender 3 Pro and I love it but I have been having issues with my infill. I juse Cura for my slicer program. When it is printing the walls it does great but when it comes to the infill it seems to be running over it and braking the infill. I was told that my bed wasn't level so I got a glass bed and the BLtouch. My bed is Level but it still runs through the infill. I could use some help figuring this out.

    #2
    I'm running an Ender3 with Creality Glass bed. No BLTouch.
    It looks more as if you're getting under-extruding on the infill. Check the Infill speed settings in Cura and turn them down and see if that helps. Default infill speed is 84 so try 64 and see if that improves your infill.
    if you check your settings for PLA as well, try 205 C for your nozzle temp and 60 C for the bed.

    Comment


      #3
      My temp is already at 205 and bed at 60. My I fill speed is at 60. But it looks and sounds like the extruded tip is knocking in to the infil.

      Comment


        #4
        If the tip is hitting the infill you'll see a buildup of filament around the nozzle and the piece can even be knocked loose from the bed as you print. Is there any filament collecting on the nozzle?
        Listen closely as it prints, is the knocking noise coming from the nozzle or is it coming from the Extruder Gear and the Filament making grinding/knock/pop noise?

        Comment


          #5
          No filament on the tip but it does knock prints loose.

          Comment


            #6
            Cura defaults to Lines infill in which each layer is unidirectional and alternating. This means that the contact between one layer of infill and the next is pretty small. Just change the pattern to anything else.
            9Appsapk.com VidMate.vin Get-vidmate.in Apk9apps.com
            Last edited by smithclark01; 04-08-2019, 09:45 AM.

            Comment


              #7
              I have just started printing with the creality ender 3, and I have some issues with infill. droidmoda.com
              Last edited by scottsen11; 07-14-2019, 04:27 PM.

              Comment

              Sign Up

              Collapse

              To post a reply to this thread you must be a member. Registration is fast, simple and absolutely free. Please join our community today!
              Working...
              X