Announcement

Collapse
No announcement yet.

Longer LK4 calibation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 9tdf
    replied
    Thanks ill try that when I'm back with my printer here is another picture showing the issue.

    Leave a comment:


  • computersavvy
    replied
    Those look like a temperature or extrusion problem. Possibly the filament is too hot, possibly the bed is too cold, maybe both.
    Maybe there is not enough infill as well. The Z has a hole in the top surface, both the X and Y are shrunken in along the sides. These problems usually happen with temperature problems in the print settings.
    Play with the settings a bit to see.
    I use PLA and my bed is usually set at 65 and the extruder is set at 190 or 195 for all but the first layer. I do not get those kinds of distortion in the prints.

    Leave a comment:


  • 9tdf
    started a topic Longer LK4 calibation

    Longer LK4 calibation

    I need help calibrating my longer LK4 some of my prints are coming out kinda crooked.(I could print a cube and it would not have 90
Working...
X