Hi,
I tried printing a big object covering almost my complete printing bed (see picture,picture without the raft). I know this is a more chalaging print and i experienced this. It failed 4x and caused serious warping. Eventually they all snapped of the bed.
My question: what can i do to prevent it from warping?
Printing details:
0.06 mm layer heigt
5% infill
I used a raft
I print on a glass bed with hairspray as adhesion
I print at 200° nozzle temp and 60° bed temp
If i forgot any info please let me know
Thank you
I tried printing a big object covering almost my complete printing bed (see picture,picture without the raft). I know this is a more chalaging print and i experienced this. It failed 4x and caused serious warping. Eventually they all snapped of the bed.
My question: what can i do to prevent it from warping?
Printing details:
0.06 mm layer heigt
5% infill
I used a raft
I print on a glass bed with hairspray as adhesion
I print at 200° nozzle temp and 60° bed temp
If i forgot any info please let me know
Thank you
Comment